Hopkins Towing Solutions LED 4in Sealed Round Stop-Tail-Turn Light Kit, C542RTM

The Hopkins Towing Solutions LED 4in Sealed Round Stop-Tail-Turn Light Kit, C542RTM is designed to conform to applicable US FMVSS108 and Canadian CMVSS safety standards for stop/tail/turn lights. The trailer light is a great LED alternative to incandescent lights - the powerful series utilizes special lens optics to simulate the look of traditional incandescent lights while delivering the long life and reliability of LED lights. The low amperage draw and durability of an LED provides a maintenance-free light lasting up to 100,000 hours and doesn't require any bulb changes while the quicker illumination keeps your safer while on the road. The polycarbonate lens and resin housing are sonic welded to prevent moisture and corrosion. Easily install the light using the included grommet and three-prong plug.

• Hopkins Towing Solutions LED 4in Sealed Round Stop-Tail-Turn Light Kit, C542RTM
• Works with 12 V systems
• When the light is in use, it aesthetically looks more like an incandescent light but features the efficiency of the LED light
• Allows use of both LED and incandescent lights on the trailer
• Long lasting - 6x the life of incandescent technology
• Current draw: 0.2 Amps
• INSTALLATION INSTRUCTIONS:1. Disconnect vehicle battery2. Light must be mounted using the enclosed rubber grommet. A 4 ½˝ diameter hole is required to secure the grommet/light assembly properly3. Push rubber grommet into opening. Connect plug to light, feed wires through grommet and snap light into grommet4. Attach the black wire to tail lamp circuit of the vehicle. Attach the red wire to the stop/turn circuit of the vehicle5. A good ground (-) connection is necessary. Use a file or screwdriver blade to clean away/remove any rust or paint from the metal surface where the ground is mounted. Attach white wire to ground (-)6. Reconnect vehicle battery.